Nordberg Symons 5 1/2 Standard Cone Crusher

Nordberg Omnicore 1560 Crusher Get a Quote

Model: Metso Nordberg Omnicone 1560 Crusher

Manufacturer: Nordberg
Inventory #:
Features:

Features:

  • Countershaft assembly with shaft, pinion and bushings.
  • Eccentric assembly with inner bushing, thrust bearing, gear, counterweight and counterweight liner
  • Socket assembly with socket and socket liner
  • Crusher sheave
  • Lubrication system
  • Hydraulic controls
  • New paint and decals
  • Test run and documented
  • Less V Belt drive
  • Less manganese
Get a Quote

Model: Metso Nordberg GP300S

Manufacturer: Metso
Inventory #:
Features:

  • Basic Assembly
  • Cavity: To be Determined
  • Stroke: 28mm
  • Bushing: 28mm/32mm/36mm
  • Main Voltage: 460-480 V
  • Control voltage for motor center: 110-120 V
  • Frequency: 60 Hz
  • IC50 Control System
  • IC50 w/Control Cabinet (460VAC)
  • Electric Cable: 30m
  • Feed Material Level Control
  • Motor: Supplied by Customer
  • Crusher Belt Pulley: 560x8/8V- (TL5050)
  • Lubrication and Adjusting Unit, IC50 460V 60Hz
  • With Hoses, 5m
  • Support Arms in Line with the Drive Shaft (0 deg STD)
  • Standard Beige Color Paint
  • Manual
  • Less drive parts

 

Get a Quote

Model: Metso Nordberg C125 Jaw Crusher

Manufacturer: Metso
Inventory #:
Features:

Basic module includes standard equipment of:
 
  • Frame, pitman assembly, flywheels, cheek plates, jaw dies, stoppers, rubber dampers, and tools
  • Mechanical setting adjustment 
  • Heat resistor
  • Jaw profile standard
  • Protection plate - front frame
  • Protection plate - pitman
  • Support brackets - installation angle 0 degrees
  • Drive on left side (viewed from the fixed jaw end)
  • Flywheels 12x8V grooves
  • No automation
  • Customer's own motor
  • Integral motor support (without jackshaft)
  • Standard beige color paint
  • Instruction/Parts manual
  • Guards
  • Less feed chute
  • Less drive parts
Metso HP500Get a Quote

Model: Metso HP500

Manufacturer: Metso
Inventory #:
Features:

  • New cast frame
  • Adjustment ring and clamping ring, clamping by clamping cylinders and pin bushings
  • Countershaft assembly with shaft, pinion and bushings
  • Bowl assembly with adjustment box
  • Hydraulic motor for setting adjustment and ring gear
  • Eccentric assembly with inner bushing
  • Socket assembly with socket and socket liner
  • Lubrication and hydraulic system

Notes

  • Less manganese
  • Less electric motor
  • Less drive parts
Get a Quote

Model: Metso Nordberg 1144 Omnicone

Manufacturer: Metso
Inventory #:
Features:

Crusher includes a lubrication tank, hyraulic cabinet, temperature gauge, and oil pressure gauge.

Features

  • Countershaft assembly with shaft, pinion, and bushings
  • Eccentric assembly with inner bushing, thrust bearing, gear, counterweight and counterweight liner
  • Socket assembly with socket and socket liner
  • Crusher sheave
  • Lubrication system
  • Hydraulic controls
  • New paint and decals
  • Test run and documented
  • Less manganese
  • Less V belt drive
  • Less installation
Metso HP200Get a Quote

Model: Metso HP200

Manufacturer: Metso
Inventory #:
Features:

General

  • Configurable product-HP200
  • Manufacturing plant-Macon France
  • Packing for transportation-Wooden box packing (for sea)
  • Final destination country-USA

Main Information

  • Installation-stationary
  • Industry-construction
  • Lubrication unit-lubrinator
  • Control type-digital
  • Norm-UL
  • Frequency-60Hz
  • Lubrication unit voltage-265/460V
  • Serial number plate material-Aluminum
  • Color-Metso beige
  • Instruction plate language-English
  • Cavity type-standard fine
  • Motor position-standard btw 8 and 4 o'clock
  • Drive-horizontal drive
  • Crusher pulley-included

Main Unit

  • Hydraulic motor location-right to countershaft
  • Crusher cavity-included
  • Accumulator certification-standard
  • Ambient temperature-normal condition down to -15°C

Motor

  • Grooves type-8V
  • Quantity of motors-1 each
  • Motor supplier-customer
  • Motor voltage-460V
  • Motor housing-IEC
  • Motor speed/pole number-4 (1500rpm 50Hz/1800rpm 60Hz)
  • Countershaft speed-1,050 1/min
  • Crusher pulley size-630mm

Equipment

  • Drive side-right

Options

  • Auxiliary equipment finish-painted
  • Accumulator charging kit-included

Lube Unit

  • Lubrinator
  • Connections hoses included
  • Connection type- "NPT"
  • Hoses length- Lub:4m & Hyd:8m
  • Oil-not supplied
  •  
Get a Quote

Model: Nordberg Symons 5 1/2 Standard Cone Crusher

Manufacturer: Nordberg/Symons
Inventory #:
Features:

Symons/Nordberg 5-1/2’ STD Cone Crusher.

https://www.youtube.com/watch?v=6JkMWImgmSw

Get a Quote

Model: Certified HP300

Manufacturer: Metso
Inventory #: 163702
Features:

  • Manganese steel crushing members
  • Hydraulic bowl clamping and adjustment
  • Hydraulic clearing of crushing chamber
  • Automatic tramp iron release, bronze bearings
  • Lubrication system (consisting of independent pump, oil pressure switch, oil temperature switch, oil tank with strainer, oil level gauge and two thermometers, and oil filter), oil cooler (air-radiator or water type)
  • Tools
  • Used crusher sheave
  • A new mantle and bowl liner is included
  • No V-Belts are included
Get a Quote

Model: Certified HP400

Manufacturer: Metso
Inventory #: 184148
Features:

  • Manganese steel crushing members
  • Hydraulic bowl clamping and adjustment
  • Hydraulic clearing of crushing chamber
  • Automatic tramp iron release, bronze bearings
  • Lubrication system (consisting of independent pump, oil pressure switch, oil temperature switch, oil tank with strainer, oil level gauge and two thermometers, and oil filter), oil cooler (air-radiator or water type)
  • Tools
  • Used crusher sheave
  • A new mantle and bowl liner is included
  • No V-Belts are included