Equipment Specials
Doppstadt INVENTHOR Type 6 Slow-Speed Shredder
Shredding
- Heavy-Duty Shredding Shaft
- Length: 7' - 2"
- Diameter: 24"
- 15-Tooth Shaft Configuration with 174mm Tooth Size
- Extremely Efficient Direct Shaft Drive
- Comb Pressure is Adjustable, Depending on Various Materials and Product Sizes Desired
- Load-Sensing System with Nitrogen Accumulators Allowing Comb to Break Away and Reposition During Operation
- Rear Conveyor
- Length: 23'
- Width: 40"
- Hydraulically Foldable with Antimagnetic Center Section
- Longitudinal Conveyor
- Length: 9'-6"
- Width: 32"
Smart Hopper
- Hydraulically Retractable Hopper to Expand Feeding Area
- Controlled by Remote Control
Engine/Mechanical/Hydraulics
- Mercedes-Benz/MTU Diesel Engine 6R1300, 350 HP @ 1,700 RPM
- Certified EPA Tier 5
- Shredding Shaft Driven VarioDirect Drive
- Fuel Tank: 132 Gallons
- Large Fold-Out Doors for Maintenance
- Maintenance Friendly Engine Compartment with LED Light System
- Hydraulically Reversible Fan Wheel
- Central Lubrication Banks
VarioDirect Drive
- Shaft Speed is Adjustable Independently of the Diesel Engine due to Hydraulic Assist
- During Operation, the Shaft Direction can be Reversed
- Shaft had a Reversible Cleaning Mode
- In the Event of an Overload or General Shredder Malfunction, the Automatic Operation will be Stopped
- The Machine can be Started with the Full Torque while under Load
Electrical/Control Panel
- 24V Control Panel System
- Complete Remote-Control Including Sender, Receiver, Loading Cable 12/24V, Loading Cable 230V, 2 Batteries, Holding for Sender
Remote Control System Functions
- Lift/Lower/Fold Rear Conveyor
- Open/Close Comb Gate
- Open/Close Shredding Comb
- Lift/Lower Optional Magnetic Belt
- Lift/Lower the Retractable Hopper
- Doppstadt Telematic Monitoring System for Remote Diagnostics and Control Panel Access by Factory Trained Technician
Chassis/Miscellaneous
- Steel Tracked Undercarriage with 2 Speeds, Ideal for Rough Terrain
- 16" Triple Bar Grouser Pads
- Driven by Track Drive with Adjustable Motor
- Total Weight: 53,000 lbs.
- Audible Starting Signal
- Fire Extinguisher, Maintenance Ladder, Tool Box for Ease of Maintenance
- Paint: RAL 2011, Deep Orange
Included
- Neodymium Over Brand Magnet/Frame/Chute for Rear Conveyor
- Limiter System
Terms/Warranty
- 2-Year or 2,000 Hour Machine Warranty
Doppstadt SM726 SA Plus Trommel
Screening:
- Screening are equivalent to 7' diameter x 26' length
- Complete with punch plate drum, replaceable in 15 minutes - 5/8" drum
- Continuous load-sensing material feeding from the hopper belt to the screening drum
- Hopper approximately 9.5 cubic yards
- Hydraulically tensioned cleaning brushes
Engine, Mechanical, and Hydraulics
- Deutz TCD 3.6 LA, Diesel 114 HP
- Certified EPA Tier 4 Final
- Fuel Capacity: 106 gallons
- 2 stage fuel filter system
- Engine swings ot at 90-degrees for ease of access
- Central lubrication banks
- Hydraulically reversible fan wheel at water and oil cooler
Electrical and Control Panel System
- Doppstadt Telematic Monitoring System for remote panel access and diagnostic by factory trained technician
- 24V Control Panel system with the following:
- Emergency Stop
- Fold/unfold/buckle side conveyor
- Fold/unfold rear conveyor
- Continuously adjustable speeds:
- Drum from 0-20 RPM
- Hopper belt from 0-.18y/s
- Emergency stop switches at the side and rear conveyors
Conveyors
- Rear Conveyor: Length: 18', Width: 40"
- Hydraulically foldable
- Side Conveyor: Length: 18', Width 40"
- Hydraulically foldable
Chassis and Transportation
- Central axle trailer chassis
- ABS braking system and road-legal light system
- Tires 435/50R 19.5
- 2-inch EC trailer coupling ring including slip on coupling
- Hydraulically adjustable jack-legs
General Information
- Permissible total weight 52,911 lbs.
- Paint RAL 2011, deep orange
Terms/Warranty
- 2-year or 2,000 hour Machine Warranty
Superior 36x150 Telestacker
Conveyor Frame
- Heavy duty truss, designed for maximum strength/weight ratio
- Main conveyor 80' long with 70" deep truss
- Stinger conveyor 80' long with 54" deep truss
- Conveyor extends to 150" long with hydraulic cable winch
- Mechanically stops retraction in the even of cable failure
Drive Specifications (Main/Stinger)
- Class I head end
- Gear reducers: Dodge shift mount
- Backstops installed in reducers
- Motors 40/40HP 1800RPM TEFC
- V-belt drive with drive guard
- Capacity: 1000 STPH of 100 PCF material, 25 degree surcharge (90% fines, 10% spherical lumps 7" minus)
- Belt speed 450/650fpm
Superior Pulleys
- Drive pulleys: 16" diameter, 3/8" herringbone lagged drum
- Tail pulleys: 14" diameter, MD Chevron® wing pulley
- Shafts turned and polished
- Bearings: Dodge
- Take ups: screw type
Portability
- Undercarriage patented FB® Undercarriage, with hydraulic raise cylinders, 15HP pumping unit and covers
- FD 50 axle
- Transport axle: (8) 11R-22.5 tires, tandem walking beam. 11'11" travel width
- Tag axle not included
- Axel jacks not applicable
- Comp. linkage not included
- Radial axle (4) 385/65D-19.5 tires on hydraulic outriggers. 18'5" stacking width
- Radial travel 2 wheel drive with 2HP planetary on each wheel
- Fifth wheel included
- Anchor pivot secures tail end during radial travel
Conveyor Components
- Belting 3 ply, 3/16 x 1/16 330PIW
- Belt splice: Flexco mechanical steel fasteners
- Superior Exterra® Primary Belt Scraper on main and stinger
- Superior idlers CEMA C, 5" diameter rolls, sealed for life ball bearings
- Load area (main): Superior Seal Sstem with 10" cartridges and steel rollers
-Steel can troughing aligner on main/Superior Navigator® on stinger - Trough 35° on 4' spacing
- Returns: steel cans on 8' spacing
- Self-aligning: Steel can troughing aligner on main/Superior Navigator® on stinger
- Radial hopper: Rock box style
- Gathering trough 6' long with adjustable rubber flashing
- Spray bars not included
Controls
- Control system PilePro™ v12 automation-FD axle, power travel, conveyor raise, and stinger extension controlled by PLC parameters or with panel mounted switches, includes auto-level
- Panelview 1000 not included
- Slide track: Galvanized C-rail and steel wheels to deliver hydraulic hoses and electrical cords to stinger
- Matl. flow switch: SonicScout™ ultrasonic sensor, stops power travel when belt is empty
- Wireless remote not included
- Zero speed sensor not included
- Voltage 480v/3ph/60hz
- Electrical enclosure with main disconnect, circuit breaker, and starters with on/off push buttons to control each electric motor
Additional Specifications
- Startup on-site training not included
- Guarding for drive and tail pulleys, v-belt drive and return idlers. Guards may not meet all local codes; customer is responsible to have guarding inspected
- Paint: 1 coat primer, 1 coat finish enamel
- Color: Superior window gray 12-00635
- Idler paint powder coated Superior orange
- Patents unit includes patents
- Owner's manual (1) copy in English included for operation and maintenance
Back to specials