Manufacturer: Metso
Inventory #:
Features:

Feeding Unit

• Feed Hopper – Standard
• Hopper Wear Plate - Included

Power Unit

• Diesel Engine - CAT
• Motor Power - 55 kW/74 hp
• Emissions Class - Tier 4F

Conveyor

• Belt Type - Plain

Optional Equipment

• Remote Radio Control - Included

Finishing

• Color - Metso Beige
• Safety Labels - ANSI

Documentation

• English manuals

Manufacturer: Fisher
Inventory #:
Features:

• 76"diameter Fisher Air Separator
• 60HP Electric Motor w/ AC Inverter Variable Speed Control
• Single 10' Axles with Brakes and Suspension
• 18" x 34' Feed Conveyor w/ 7.5HP Motorized Head Pulley
• (2) 18" x 24' Discharge Conveyors w/ 7.5HP Motorized Head Pulley
• Oil Bath Lube System
• On Plant Hydraulic System and Cylinders for Ease of Setup and Teardown
• Removable Electrical Panel Stand w/ Controls and Powercord
• US Patent No. 6,290,071

Manufacturer: Superior
Inventory #:
Features:

Conveyor Frame             

*Head section- 40' long, skid mounted, idlers are on  4' spacing, head shaft is approximately 8' above grade; broken down for shipping         

*Tail section- skid mounted, fully assembled with tail pulley, 5' gathering trough, and idlers          

*Intermediates- 4" structural channel, 10' long, supported on 2' high "H" supports

Drive specifications       

*Drive- Class I head end

*Gear reducer- Dodge shaft mount

*Backstop- not included

*Motor- 75 HP 1800 RPM TEFC

*V-belt drive- with drive guard

*Maximum Capacity- 1000 STPH of 100 PCF material; belt speed 400 FPM;  maximum 42' lift at 400' long; 10' lift at 1000' long (90% fines, 10% spherical lumps 7" minus)                

Superior pulleys             

*Drive pulley- 24"  dia. crown face drum with 3/8 in. herringbone lagging             

*Tail pulley- 18" dia. Chevron® wing

*Snub pulley- 18" dia. flat face drum with 1/4 in. smooth lagging             

*Bend pulleys- 18" dia. flat face drum with 1/4 in. smooth lagging

*Weight pulley- 18" dia. crown face drum with 1/4 in. smooth lagging    

*Shafts- Turned and polished

*Bearings- Dodge

*Gravity take-up- take-up weight by owner

*Screw take-ups- capacity up to 6' long

Conveyor Components           

*Belting- 3 ply 3/16" x 1/16" 330 PIW

*Belt splice- not included

*Primary scraper- Exterra® Primary Belt Cleaner

*Superior Idlers- CEMA C, 5” dia. rolls, sealed for life ball bearings           

*Load area- 20° trough, 18" spacing

*Trough- 35° on 4' spacing

*Returns- steel rolls, on 10' spacing

*Self-align trough- approximately 100' spacing

*Self-align return- Navigator® return idler spaced approximately 100' apart             

*Radial hopper- 5' long, sloped sides

*Gathering trough- 5' long with adjustable rubber flashing

Additional Specifications           

*Guarding- for drive and tail pulleys, v-belt drive and return idlers. Guards may not meet all local codes; customer is responsible to have guarding inspected.         

*Voltage- 380 v / 3 ph / 50 hz

*Electrical- Not included

*Return guards- PVC guard

*E-stop- switch with pull cable on both sides

*Discharge hood- not included  

*Conveyor covers- not included

*Head & Tail Paint- 1 coat primer, 1 coat finish enamel (*available colors below) 

*Intermediates- Galvanized

*Idler Paint- powder coated Superior Orange

*Owner’s Manual- (1) copy in English included for operation and maintenance

Manufacturer: Mellott Company
Inventory #:
Features:

Chassis

• Wide Flange Fabricated Frame Complete with Cribbing Supports
• Manual 4-Point Leveling System
• Tandem Axle Suspension with Eight (8) 11R24.5 Tires
• Road Ready (Airbrakes, Mud Flaps)

Feeder

• Syntron MF200 Electro Mechanical Vibrating Feeder
• 36" x 72" pan with controller mounted on frame
• ¼" T1A Liners
• 4 HP Below Deck Drive

Receiving Hopper

• 12' x 15' Top Opening with Winged Hopper Extensions
• 36 Cubic Yard Water Level Capacity
• Hopper Constructed from ½" Mild Steel Plate with 3/a" Mild Steel Extensions
• Feeder Skirts with Manual Level Control Gate

Bin

• Max Feed Size -6"
• Maximum Plant Capacity -Up to 600 TPH
• Maximum Bin Capacity -36 Cubic Yards

Conveyor – 42’ x 50’ Long

• 20 HP drive consisting of one (1) 20 HP, 1800 RPM, TEFC electric motor, Dodge TAIi TA4207H25 class II reducer, rod assembly, bushing, backstop, motor mount, drive guard
• Channel Frame Construction with Hinge for Travel
• CEMA C5 Idlers
• Two (2) Mellott Company standard return roll guards at tail-end of conveyor
• 3-ply, 450 PIW, ¼" x 1/16", impact abrasion resistant cover, belting with Flexco mechanical belt slice

Physical/Operating Characteristics

• Overall Length -51 '-2 ½''
• Travel Height-13'-8 7/,s"
• Overall Width -12'-0 ¼"
• Feed Height- 16'-10 5/16"
• Maximum Discharge Clearance -16'-8 ½"
• Maximum Discharge Height -18'-2 7/16"
• 38,000 lbs.

Check out a video here.

Manufacturer: EcoStack
Inventory #:
Features:

Includes:

• CAT 2.2, 50HP
• 60' long folded frame
• 36" wide 3-ply belt
• Single hydraulic motor head drive
• Head and tail scrapers
• Hydraulic head folding
• Elect automation controls with dog lead remote for tracking
• On 10' track x 16" shoe
• Hydraulic oil cooler

Manufacturer: EcoStack
Inventory #:
Features:

Includes:

• CAT 2.2 turbo engine 60HP
• 36" heavy 3-ply belt
• Head and tail scrapers
• Hydraulic oil cooler + fluted tank
• On 10' x 16" shoe
• OMV 400 twin head drive
• Elect automation controls c/w with lead remote
• Full side skirting
• Hydraulic head folding
• 5mm steel on feed boot
• Impact bar system under feed area

Manufacturer: Superior
Inventory #:
Features:

Conveyor Frame

• Heavy duty truss, designed for maximum strength/weight ratio
• Main conveyor 80' long with 70" deep truss
• Stinger conveyor 80' long with 54" deep truss
• Conveyor extends to 150" long with hydraulic cable winch
• Mechanically stops retraction in the even of cable failure

Drive Specifications (Main/Stinger)

• Class I head end
• Gear reducers: Dodge shift mount
• Backstops installed in reducers
• Motors 40/40HP 1800RPM TEFC
• V-belt drive with drive guard
• Capacity: 1000 STPH of 100 PCF material, 25 degree surcharge (90% fines, 10% spherical lumps 7" minus)
• Belt speed 450/650fpm

Superior Pulleys

• Drive pulleys: 16" diameter, 3/8" herringbone lagged drum
• Tail pulleys: 14" diameter, MD Chevron® wing pulley 
• Shafts turned and polished
• Bearings: Dodge
• Take ups: screw type

Portability

• Undercarriage patented FB® Undercarriage, with hydraulic raise cylinders, 15HP pumping unit and covers
• FD 50 axle
• Transport axle: (8) 11R-22.5 tires, tandem walking beam. 11'11" travel width
• Tag axle not included
• Axel jacks not applicable
• Comp. linkage not included
• Radial axle (4) 385/65D-19.5 tires on hydraulic outriggers. 18'5" stacking width
• Radial travel 2 wheel drive with 2HP planetary on each wheel
• Fifth wheel included
• Anchor pivot secures tail end during radial travel

Conveyor Components

• Belting 3 ply, 3/16 x 1/16 330PIW
• Belt splice: Flexco mechanical steel fasteners
• Superior Exterra® Primary Belt Scraper on main and stinger
• Superior idlers CEMA C, 5" diameter rolls, sealed for life ball bearings
• Load area (main): Superior Seal Sstem with 10" cartridges and steel rollers
  -Steel can troughing aligner on main/Superior Navigator® on stinger
• Trough 35° on 4' spacing
• Returns: steel cans on 8' spacing
• Self-aligning: Steel can troughing aligner on main/Superior Navigator® on stinger
• Radial hopper: Rock box style
• Gathering trough 6' long with adjustable rubber flashing
• Spray bars not included

Controls

• Control system PilePro™ v12 automation-FD axle, power travel, conveyor raise, and stinger extension controlled by PLC parameters or with panel mounted switches, includes auto-level 
• Panelview 1000 not included
• Slide track: Galvanized C-rail and steel wheels to deliver hydraulic hoses and electrical cords to stinger
• Matl. flow switch: SonicScout™ ultrasonic sensor, stops power travel when belt is empty
• Wireless remote not included
• Zero speed sensor not included
• Voltage 480v/3ph/60hz
• Electrical enclosure with main disconnect, circuit breaker, and starters with on/off push buttons to control each electric motor

Additional Specifications

• Startup on-site training not included
• Guarding for drive and tail pulleys, v-belt drive and return idlers. Guards may not meet all local codes; customer is responsible to have guarding inspected
• Paint: 1 coat primer, 1 coat finish enamel
• Color: Superior window gray 12-00635
• Idler paint powder coated Superior orange
• Patents unit includes patents
• Owner's manual (1) copy in English included for operation and maintenance

Manufacturer: Mellott Company
Inventory #:
Features:

Unit to include the following:

• Conveyor designed for 300TPH at 350FPM belt speed with 19; of total lift for 100PCF material
• Dodge TAII class I reducer, rod assembly, bushing, backstop, motor mount, drive guard
• Standard fabricated head section design with 18" diameter CEMA rated drum drive pulley
• Standard fabricated tail section design with 18" diameter CEMA rated wing tail pulley, Dodge LD50x18 screw take-up
• 3/8" herringbone lagging on drive pulley
• SCM bearings
• Continental CEMA B, 5" diameter trough idlers 4' spacing with a cluster at load point and CEMA B, 5" diameter return idlers at 10' spacing
• 2-ply, 220 PIW, 3/16" x 1/16" covers, belting with Flexco mechanical splice kit
• Standard undercarriage support with fixed front and rear booms, tubular axle assembly with swivel wheels and single 11:00 x 22.5, 12-ply tires, tail-end pivot anchor plate 

Manufacturer: Mellott Company
Inventory #:
Features:

Unit to include the following:

• Conveyor designed for 400TPH at 378FPM belt speed for 100PCF material
• 20HP drive consisting of one (1) 20HP, 16" diameter lagged motorized head pulley
• Standard fabricated tail section design with 12" diameter CEMA rated wing tail pulley, Dodge wide slot screw take-up with 18" of travel
• SCM bearings
• Continental CEMA B, 5" diameter trough idlers at 4' spacing with a cluster at load point and CEMA B, 5" diamater return idlers at 10' spacing
• 2ply, 220PIW, 3/16" x 1/16" covers, belting with Flexco mechanical splice kit
• Standard 24" deep lattice frame truss with 3" x 3" x 1/4" chord angles and "bolted" 2" x 2" x 1/4" lattice angles
• Standard 10'-0" long loading hopper with clamp style flashing system
• Standard return roll guards
• Standard structural support to grade with "V-type" head-end suport for stockpiling material, based on safe spans between supports by Mellott Company, assuming level grade
• Conveyor to be fully assembled with belt and idlers prior to shipping 

Manufacturer:
Inventory #:
Features:

Unit Specifications:

• Size: 44" x 32'
• Screw Speed(%) - 75%
• Screw Speed RPM- 14 RPM
• Capacity: 260STPH
• Construction: 1/4" ASTM A36 steel
• Bearings: Outboard pillow block
• Wear Shoes: Urethane
• Supports: Front end supports
• Flume: Over-flow flume with adjustable weir
• Discharge chute: included
• Safety Cover: not included
• Empty weight: 30,000 lbs
• Also includes: feed hopper, tub baffle
• Paint: Superior Class 1 - (1) coat primer; (1) top coat enamel
• Color: Window Gray 12-00635

Drive Specifications:

• Motor:(2) 215HP 1800 RPM TEFC
• Voltage: 230/460v/3ph/60Hz
• V-belt drive: with drive guard
• Electrical: Control panel and wiring not included
• VFD: not included

Manufacturer: Superior
Inventory #: 225450
Features:

Unit Specifications:

• Size: 44" x 32'
• Screw Speed(%) - 75%
• Screw Speed RPM- 14 RPM
• Capacity: 130 STPH
• Construction: 1/4" ASTM A36 steel
• Bearings: Outboard pillow block
• Wear Shoes: Urethane
• Supports: Front end supports
• Flume: Over-flow flume with adjustable weir
• Discharge chute: included
• Safety Cover: not included
• Empty weight: 16,340 lbs
• Also includes: feed hopper, tub baffle
• Paint: Superior Class 1 - (1) coat primer; (1) top coat enamel
• Color: Window Gray 12-00635

Drive Specifications:

• Motor: 15HP 1800 RPM TEFC
• Voltage: 230/460v/3ph/60Hz
• V-belt drive: with drive guard
• Electrical: Control panel and wiring not included
• VFD: not included

Manufacturer: Mellott Company
Inventory #:
Features:

Belt Feeder
•Class II
•20 HP, 100 FPM, 36" BW x 23'-6" Long Conveyor
•Channel Frame Construction
•CEMA C5 Extended Center Idlers
•Full Length Skirt Board w/ AR400 Liners
•TA II Series Dodge Shaft Mounted Gear Reducer
•1-PLY, 440 PIW Conveyor Belting w/ 1/4" x 1/8" Covers

Chassis
•Wide Flange Fabricated Frame Complete w/ Cribbing Supports
•Manual 4-Point Leveling System
•Single Axle Suspension with Four 11R24.5 Tires
•Road Ready (Airbrakes, Mud Flaps)

14 Yard Receiving Hopper
•8' x 16' Top Opening
•High Angle Hopper Constructed from 1/4" MS w/ 1/4" AR400 Liners
•Manual Level Control Gate

Available Options
•Hinged Inclined / Flat Grizzly
•Scraper

Manufacturer: Fisher
Inventory #:
Features:

• 13' dia Fisher Portable Air Separator
• 75HP Electric Motor w/ Cutler Hammer Variable Speed Control
• Triple 10' Hub Pilot Axles w/ Brakes and Mechanical Suspension
• 18"x34' Feed Conveyor w/ 7-1/2HP Motorized Head Pulley
• (2) 18"x24' Discharge Conveyors w/ 7-1/2HP Motorized Head Pulley
• Automatic Lubrication System
• On Plant Hydraulic System for Ease of Setup and Tear Down
• Removable Electrical Panel Stand w/ Controls