New Rock Crushers

Below is a listing of our new Crushers inventory.

Get a Quote

Model: Superior P400 Patriot® Cone Crusher

Manufacturer:
Inventory #:
Features:

Standard Features                      

  • Weight - Approx. 52,000 lbs, bare cone 
  • Main Frame -One piece cast steel main frame assembly, AR steel liners, 4340 forged steel shaft, bronze seat liners with retention lip, bronze pin bushings, and cast arm guards                         
  • Inspection Ports - not applicable             
  • Adjustment Ring - Cast steel adjustment ring and clamping ring with internal threads, (10) clamping cylinders, (5) indexing pins, adjustment motor mount, (3) vibration sensors detect adjustment ring movement              
  • Adjustment Assembly - Forged steel drive ring, drive ring supports with molded urethane wear pads, planetary drive unit with pinion, hydraulic drive motor [spring applied brake], (2) bowl adjustment sensors [customer responsible to run cables]                   
  • Bowl Assembly - Cast steel with external threads, steel adapter ring with threaded retention hardware, fitted with manganese steel liner     
  • Head Assembly - Cast steel with forged steel head ball, raised seat with wear indicator groove, bronze upper and lower bushings, molded urethane T-seal, manganese steel mantle                         
  • Liner Configuration - to be determined
  • Backing - Liners required poured backing material for installation             
  • Manganese Content - Standard 18% manganese liner     
  • Eccentric - Cast ductile iron with bronze bushing
  • Counterweight - Cast steel with poured lead weight, AR steel counterweight guard, forged steel spiral bevel gear, molded urethane U-seals            
  • Socket Assembly - Forged steel socket with bronze liner
  • Countershaft Box - Cast steel with bronze bushings, forged steel countershaft and spiral bevel pinion gear            
  • Tramp release - (6) hydraulic cylinders mounted rod end down with protective boot covers, relief valve for tramp pressure relief, single gas charged bladder accumulator                         
  • Driven Sheave -   10 groove sheave with speed sensor

 

Hydraulic Power Unit Assembly               

  • Power Unit - Fabricated steel 50 gallon tank, skid type mounting frame, top cover mounted motor, submerged gear type pump, solenoid control valves, filter with replaceable cartridge, bladder clamping cylinder accumulator, removable cover to protect power unit                     
  • Controls - Basic standalone system with operator control box: includes main adjustment and pressure monitoring

 

Package Lube Assembly              

  • Lube Tank - Skid mounted 120-gallon capacity, hinged top cover to view return oil line, 6KW lube tank heater, sight gauge and low oil level switch                     
  • Oil Pump - Submerged gear type, 54 GPM flow, 20 micron filter, replaceable cartridge, filter bypass relief valve, (2) pressure differential switches for a dirty filter warning and bypass alarm  
  • Air Cooler - Air type lube system oil cooler, relief valve and related cooler piping    
  • Sensors - Relay switch sensors, Crusher drain line temperature readout, supply oil temperature readout, lube tank temperature readout, all sensors and switches wired to mounted terminal box

 

Additional Specifications                           

  • Main drive motor - Motor not included 
  • Voltage - 480 v / 3 ph / 60 hz     
  • Starter package - Starter package not included  
  • Drive belt package - Drive belt package not included       
  • Backup pump - Backup pump not included         
  • Cavity level sensor - Cavity level sensor not included      
  • Cold Weather Kit - Cold Weather Kit not included            
  • Automation - Automation not included 
  • Countershaft blower - Countershaft blower not included             
  • CSS Display - CSS Display not included   
  • Display Tether - CSS Display Tether not included
  • Paint - Standard Superior paint - Window Gray [RAL 7040] on Main Frame, Drive ring retainer, Upper Hopper, Gear drive/brake/hydraulic motor.    Graphite Gray [RAL 7024] on Adjustment cap, Drive ring, Adjustment ring, Accumulator, Tramp release cylinders                                         
  • On-Site Service - Not included
Get a Quote

Model: Superior P300 Patriot® Cone Crusher

Manufacturer:
Inventory #:
Features:

Standard Features              

  • Weight-Approx. 33,500 lbs, bare cone
  • Main Frame-One piece cast steel main frame assembly, AR steel liners, 4340 forged steel shaft, bronze seat liners with retention lip, bronze pin bushings, and cast arm guards
  • Inspection Ports-not applicable
  • Adjustment Ring-Cast steel adjustment ring and clamping ring with internal threads, (8) clamping cylinders, (5) indexing pins, adjustment motor mount, (3) vibration sensors detect adjustment ring movement
  • Adjustment Assembly-Forged steel drive ring, drive ring supports with molded urethane wear pads, planetary drive unit with pinion, hydraulic drive motor [spring applied brake], (2) bowl adjustment sensors [customer responsible to run cables]
  • Bowl Assembly-Cast steel with external threads, steel adapter ring with threaded retention hardware, fitted with manganese steel liner
  • Head Assembly-Cast steel with forged steel head ball, raised seat with wear indicator groove, bronze upper and lower bushings, molded urethane T-seal, manganese steel mantle
  • Liner Configuration - to be determined
  • Backing - Liners required poured backing material for installation
  • Manganese Content-Standard 18% manganese liner
  • Eccentric-Cast ductile iron with bronze bushing
  • Counterweight-Cast steel with poured lead weight, AR steel counterweight guard, forged steel spiral bevel gear, molded urethane U-seals
  • Socket Assembly-Forged steel socket with bronze liner
  • Countershaft Box-Cast steel with bronze bushings, forged steel countershaft and spiral bevel pinion gear
  • Tramp release-(6) hydraulic cylinders mounted rod end down with protective boot covers, relief valve for tramp pressure relief, single gas charged bladder accumulator
  • Driven  Sheave-8-groove sheave with speed sensor

Hydraulic Power Unit Assembly          

  • Power Unit-Fabricated steel 50 gallon tank, skid type mounting frame, top cover mounted motor, submerged gear type pump, solenoid control valves, filter with replaceable cartridge, bladder clamping cylinder accumulator, removable cover to protect power unit  
  • Controls-Basic standalone system with operator control box: includes main adjustment and pressure monitoring

Package Lube Assembly                         

  • Lube Tank-Skid mounted 80-gallon capacity, hinged top cover to view return oil line, 6KW lube tank heater, sight gauge and low oil level switch     
  • Oil Pump-Submerged gear type, 38 GPM flow, 20 micron filter, replaceable cartridge, filter bypass relief valve, (2) pressure differential switches for a dirty filter warning and bypass alarm  
  • Air Cooler-Air type lube system oil cooler, relief valve and related cooler piping 
  • Sensors-Relay switch sensors, Crusher drain line temperature readout, supply oil temperature readout, lube tank temperature readout, all sensors and switches wired to mounted terminal box

Additional Specifications                       

  • Main drive motor-Motor not included           
  • Voltage-480 v / 3 ph / 60 hz   
  • Starter package-Not included
  • Drive belt package- Not included       
  • Backup pump- Not included  
  • Cavity level sensor- Not included       
  • Cold Weather Kit- Not included          
  • Automation-Automation Not included           
  • Countershaft blower- Not included   
  • CSS Display- Not included      
  • Display Tether- Not included 

Paint-Standard Superior paint - Window Gray [RAL 7040] on Main Frame, Drive ring retainer, Upper Hopper, Gear drive/brake/hydraulic motor.  Graphite Gray [RAL 7024] on Adjustment cap, Drive ring, Adjustment ring, Accumulator, Tramp realase cylinders   

Metso C130 JawGet a Quote

Model: Metso C130

Manufacturer: Metso
Inventory #:
Features:

Basic Module Includes Standard Equipment Of:

  • Frame, pitman assembly, flywheels, cheek plates, jaws, stopers, rubber dampers, and tools
  • Hydraulic setting adjustment
  • Hydraulic power unit
  • Electrification
  • 460V/60Hz
  • Heat resistor
  • Jaw profile-quarry
  • Long jaw dies (1/1)
  • Protection plate-front frame
  • Protection plate-pitman
  • Crusher support brackets
  • Drilling for main bearing temperature sensors
  • Lifting tools for cheek plates
  • Lifiting tools for jaw dies
  • Lifting tools for toggle plate
  • Tool kit
  • Drive on right side (viewed from the fixed jaw end)
  • Flywheels 12x8V grooves
  • Customer's own motor, Motor not included
  • Other size
  • Integral motor support
  • Drive guard and flywheel guard for V-belt drive, drive on right
  • Funnel assembly, heavy duty
  • Standard beige color paint
  • Stickers ANSI
  • Transportation-build complete
  • Instruction/parts manuals/CD (English)
MX4 Cone CrusherGet a Quote

Model: Metso MX4 Cone Crusher

Manufacturer: Metso
Inventory #:
Features:

General

  • Configurable product-MX4
  • Delivery project type-standard
  • Final destination country-USA
  • Manufacturing plant- Sorocaba Brazil

Main Information

  • Electricity standard-UL
  • Frequency-60Hz
  • Main voltage-265/460V
  • Cavity-fine
  • Stroke-73mm
  • Accumulator certification-standard

Lubrication Unit

  • Lubrication unit-included
  • Hose connection type-nation pipe tape (NPT)
  • Cooler- air cooler (temperature up to 40°C)
  • Cooler location-on frame
  • Hoses to cooler-4m
  • Hoses to crusher-lub: 6m & Hyd: 10m

Automation

  • Automation system-IC60C
  • Feed level monitoring-analog
  • Cable kit E1-E2/E1-E3-100m
  • Communication protocol-modbus TCP/IP protocol
  • Remote user interface (RUI)-included
  • Display unit language-English

Drive Equipment

  • Drive-horizontal drive
  • Groove type-8V
  • Motor speed-1800 1/min
  • Countershaft speed-950 1/min
  • Belt guards-included
  • Crusher pulley-762mm
  • Sub frame-included
  • Motor position-standard
Metso C120Get a Quote

Model: C120

Manufacturer: Metso
Inventory #: 203930
Features:

  • Hydraulic Wedge Adjustment
  • Hydraulic Power Unit
  • Electrification
  • 460V/60Hz
  • Heat Resistor
  • Jaw Profile: Quarry
  • 2 Piece Jaw Dies (2/2)
  • Protection plate - front frame
  • Protection plate - pitman
  • Drillings for Main bearing temperature sensors
  • Lifting Tools for Cheek Plates
  • Lifting Tools for Jaw Dies
  • Lifting Tools for Toggle Plate
  • Tool Kit
  • Support Brackets
  • Flywheels - Drive on Left Side
  • Flywheels 10x8V grooves
  • Integral Motor Support
  • Drive Guard and Flywheel Guard for V-Belt Drive, Drive on Left
  • Feed chute
  • V-belts
  • Drive pulley
  • Belt Protection Plate
Metso GP300SGet a Quote

Model: GP300S

Manufacturer: Metso
Inventory #: 173667
Features:

  • Cavity: GP300S C
  • Stroke 32 mm
  • Bushing 18 mm / 25 mm / 32 mm / 40 mm
  • Main voltage: 460-480 V
  • Control voltage for motor centre: 110-120 V
  • Frequency: 60 Hz
  • Automation -IC50 With control cabinet (460 VAC)
  • Electric cable 30 m
  • Crusher belt pulley 560 x 8 / 8V - (TL5050)
  • Motor sheave
  • V-belts
  • Lubrication and adjusting unit, IC50 460V 60Hz
  • With hoses, 5m
  • Feed hopper
  • Support arms in line with drive shaft (0 deg STD)
Get a Quote

Model: HP4

Manufacturer: Metso
Inventory #: 184145
Features:

  • Cast frame with thrust bearing, mainshaft and seat liners
  • Adjustment ring and clamping ring, clamping by hydraulic cylinders and pin bushings
  • Overload protection by double-acting cylinders and accumulators
  • Countershaft assembly with shaft, pinion and bushings
  • Lock bolt assembly with feed cone
  • Bowl assembly with adjustment box
  • Hydraulic motor for setting adjustment and ring gear
  • Head with inner bushings and spherical bearing
  • Eccentric assembly with inner bushing, thrust bearing, gear, counterweight and counterweight liner
  • Spherical socket assembly
  • New manganese per application
  • Package Lube/hydraulic unit with standard length hoses
  • Crusher oil piping assembly NPT
  • Voltage 265/460 V, frequency 60 Hz
  • Crusher sheave 8V
  • Countershaft speed 950 rpm
  • Motor sheave with hub
  • Set of V-belts
  • Air seal blower
  • Charging assembly kit
Get a Quote

Model: HP300

Manufacturer: Metso
Inventory #: 111315
Features:

  • Cast frame with thrust bearing, mainshaft and seat liners
  • Adjustment ring and clamping ring, clamping by hydraulic cylinders and pin bushings
  • Overload protection by double-acting cylinders and accumulators
  • Countershaft assembly with shaft, pinion and bushings
  • Lock bolt assembly with feed cone
  • Bowl assembly with adjustment box
  • Hydraulic motor for setting adjustment and ring gear
  • Head with inner bushings and spherical bearing
  • Eccentric assembly with inner bushing, thrust bearing, gear, counterweight and counterweight liner
  • Spherical socket assembly
  • New manganese per application
  • Packaged lube system
  • Control Box
  • Accessories assembly
  • Cooler & piping assembly
  • Hydraulic circuit assembly
  • Crusher oil piping
  • Special voltage and frequency
  • Crusher sheave 8V
  • Countershaft speed 1050 rpm
  • Motor Sheave
  • Bushing
  • V-belts
  • Charging assembly kit
Get a Quote

Model: HP400

Manufacturer: Metso
Inventory #: 104089
Features:

  • Cast frame with thrust bearing, mainshaft and seat liners
  • Adjustment ring and clamping ring, clamping by hydraulic cylinders and pin bushings
  • Overload protection by double-acting cylinders and accumulators
  • Countershaft assembly with shaft, pinion and bushings
  • Lock bolt assembly with feed cone
  • Bowl assembly with adjustment box
  • Hydraulic motor for setting adjustment and ring gear
  • Head with inner bushings and spherical bearing
  • Eccentric assembly with inner bushing, thrust bearing, gear, counterweight and counterweight liner
  • Spherical socket assembly
  • New manganese per application
  • Packaged lube system
  • Crusher oil piping
  • Special voltage and frequency
  • Crusher sheave ductile iron 8V
  • Countershaft speed 830 rpm
  • Motor pulley
  • V-belts
  • Charging assembly kit