Manufacturer:
Inventory #:
Features:

Feeder 

• Apron Feeder AF11-5,5
• Feed Hopper 4,8 m3 for apron feeder

Engine and Screen

• Engine Module

1. Catepillar Engine
2. Engine Module Installation Parts

• Screening Unit

1. Top Deck
2. Top deck mounting kit for wire mesh and punched plated
3. Bottom deck
4. Bottom deck mounting kit for wire mesh

• Conveyors

1. Overflow Conveyor
2. Screen underflow conveyor for fines
3. Side conveyors for fraction material
4. Belt Conveyor H12-5
5. Belt Conveyor H12-4
6. Wing Conveyor H8-8, 5 (RH)
7. Wing Conveyor H8-8, 5 (LH)

• Optional equipment

1. ST - Series Standard Tool Kit
2. Remote Radio Control
3. Tool Kit
4. Radio control [226] 433,100 - 434,750 Hz

• Localization

1. Manuals
2. Display Unit
3. Safety Labels
4. Instruction/Parts Manual
5. English Display Unit
6. English Sticker Kit

Manufacturer: Metso
Inventory #:
Features:

2000. Metso HP400 cone crusher plant.

Heavy duty chassis fabricated frame

cribbing supports, 24 inch beam, triple axle, 48” width x 20” length discharge conveyor.

Manufacturer: Metso
Inventory #:
Features:

• Excellent screening capacity
• User-friendly “one button” process start-up
• Accurate classification of up to three end product fractions
• Multi stage crushing and screening operations with other Lokotracks

Manufacturer: Metso
Inventory #:
Features:

Includes standard equipment of frame, feed hopper 6m³ (8yad³), tracks, hydraulics, electrification, control panels, fuel tank, service platform, working lights, rails and ladders.

Equipment for basic model

• Basic module with main conveyor under crusher
• Working lights
• Light pole with halogen lights

Feeder and Hopper

• Feeder
  -Vibrating feeder unit TK11-42-2V
• 1st Grizzly
  -ZigZag grizzly 38mm (1 1/2in)
• 2nd Grizzly
  -Grizzly spacing 52mm (2in)
  -Screen mesh size 35mm
• Feed hopper
  -Feed hopper capacity of 6m³ (8yd³ )
  -Feed hopper extensions 9m³  (12yd³ )
• By-pass arrangement
  -By-pass chute with conveyor under crusher
  -Preparation for hydr telescopic side conveyor
  -Conveyor module, H5-5 telescopic belt conveyor

Impact Crusher

• Crusher module NP1213M
• Martensitic Xwin hammers
• Hydraulic assistance
• Service hoist
• Belt protection plate

Main Conveyor

• Main conveyor H12-11R

Additional Equipment

• Dust encapsulation
• Preparation for magnetic separator
• Magnetic separator

Engine

• Caterpillar C13 diesel engine
• Filter cartridge kit

Screen Unit

• Screen unit
• Screen module TK13-30S with H5-10 return conveyor 
• Steel screen cloth 40mm (TK13-30S)

Other Additional Equipment

• Ancillary Equipment
  -Interlocking cable with secondary LT
  -Hydraulic power take off 1
  -High pressure water spraying system with pump
  -Fuel pump
  -Service kit
• Remote radio control
  -Remote radio control 433.100-434.750MHz
• Paint color
  -Standard beige and dark grey

Manufacturer: Metso
Inventory #:
Features:

• Includes standard equipment of frame, feed hopper 6m³ (8 yd³), tracks, hydraulics, electrification, control panels, fuel tank, service platform, working lights, rails and ladders.
• Equipment for basic module
  
  • Working lights
  • Light pole with halogen lights
• Feeder & Hopper
• Vibrating feeder TK11-42-2V
• Grizzly spacing 52 mm (2 in)
• Screen mesh, size 35 mm
• Feed hopper capacity of 6 m³ (8 yd³)
• By-pass chute (TK11-42-2V)
• Preparation for hydr. telescopic side conveyor
• Conveyor module, H5-5 telescopic belt conveyor
• Crusher
• Nordberg C116 jaw crusher
• Standard
• Preparation for hydraulic setting adjustment
• Material level control
• Automatic lubrication unit
• Main conveyor
• Main conveyor H12-14R
• Preparation for magnetic separator
• Magnetic separator
• Engine
• TIER 3 (stage III A) Caterpillar C13
• Other additional equipment
• Climate kit
• Interlocking cable with secondary LT
• Hydraulic power take off 1
• Service kit
• Preparation for hydraulic hammer items
• Hydraulic piping
• Electrification
• Remote radio control 433.100 - 434.750 MHz

Manufacturer: Metso
Inventory #: 74304
Features:

Feeder

• TK11-42-2V horizontal vibrating feeder
• Grizzly spacing 52 mm (2 in)
• Mesh size 35 mm
• Feed hopper capacity of 6 m³ (8 yd³)
• Feed hopper extensions 9 m³ (12 yd³)
• By-pass chute with a flop gate
• Preparation for side conveyor H5-5
• Conveyor H5-5

• Nordberg C106 jaw crusher
• Preparation for hydraulic setting adjustment
• Hydraulic setting adjustment
• Material level control
• Belt protection plate

• Main conveyor H10-14
• Magnetic separator

• Caterpillar C9 ATAAC diesel engine

• Interlocking cable with secondary LT
• Picking Station
• Remote radio control 433.100 - 434.750 MHz
• Water Spraying System, water manifold
• Hydraulic power take off

Manufacturer: Metso
Inventory #: 172210
Features:

• Includes standard equipment of frame, feed hopper 6m³ (8 yd³), tracks, hydraulics, electrification, control panels, fuel tank, service platform, working lights, rails and ladders.
• Basic module with main conveyor under crusher
  • Working lights
  • Light pole with halogen lights
• Vibrating feeder unit TK11-42-2V
  • 1st grizzly ZigZag grizzly 38 mm (1 1/2 in)
  • 2nd grizzly ZigZag grizzly 38 mm
  • Screen mesh, size 35 mm
  • Feed hopper capacity of 6 m³ (8 yd³)
  • Feed hopper extensions 9 m³ (12 yd³)
  • By-pass chute with conveyor under crusher
  • Preparation for hydr. telescopic side conveyor
  • Conveyor module, H5-5 telescopic belt conveyor
• Impact crusher
  • Crusher module NP1213M
  • Martensitic Xwin hammers
  • Hydraulic assistance
  • Service hoist
  • Belt protection plate
• Main conveyor H12-14R
  • Preparation for magnetic separator
  • Magnetic separator
• Engine
  • Caterpillar C13 diesel engine
• Options
  • Interlocking cable with secondary LT
  • Hydraulic power take off 1
  • High pressure water spraying system with pump
  • Remote radio control 433.100 - 434.750 MHz

Manufacturer: Metso
Inventory #: 153117
Features:

• Mobile Screen
  Includes components which are standard in every Lokotrack ST620 like frame, tracks, hydraulics, electrification, control panels, belt guards, service platforms, rails and ladders.
• Caterpillar 3056E DITAAC
• Screen DS303MV, steel mesh
• Lifting conveyor H12-11
• Lifting conveyor H12-11, mounting
• Dust encapsulation for lifting conveyor
• Feed hopper - standard
• Discharge conveyor H12-9
• 1st deck Side conveyor H8-6
• 2nd deck Side conveyor H6.5-8
• 3rd deck Side conveyor H6.5-8
• Dividing hopper 2
• Preparation for side conveyor H8-6

Manufacturer: Metso
Inventory #: 173666
Features:

• Includes components which are standard in every Lokotrack LT200HP like frame, tracks, hydraulics, electrification, control panels, belt guards, service platforms, rails and ladders
• Feed conveyor
  
  • Belt conveyor H10-6
  • Feed hopper 5 m³ (6,5 yd³)
  • Metal detector
• Crusher
  
  • Cone crusher HP200 STD coarse
  • Material level control
  • Electric supply for lubrication unit (24 V/460 V) USA
  • Lubrication unit oil heating electrification (24 V/460 V) USA, CAN
  • Mineral oil for lubrication unit
• Main conveyor
  
  • Belt conveyor H8-10
• Engine
  
  • Caterpillar C13 diesel engine
  • Hydraulic generator 10 kVA (UK/USA)
• Options
  
  • Hydraulic power take off 2
  • Water spraying system
  • Interlocking cable with secondary LT
  • Remote radio control 433.100 - 434.750 MHz

Manufacturer: Metso
Inventory #: 153118
Features:

• Mobile Crushing Plant
• Basic module
• Feeder unit TK12-32-2V
• Feeder with by-pass
• Grizzly spacing 35 mm + transport deck
• By-pass conveyor H8-6
• Counter weight
• Lifting conveyor H12-6
• Dust encapsulation (H12-6)
• Cone crusher HP300 STD coarse
• Crusher automation A2020
• Material level control
• Standard feed hopper for crusher
• Service platforms
• Main conveyor H12-9
• Recirculating conveyor H8-12
• Caterpillar C-15 engine
• Electrification 460V/110V/60 Hz
• Generator 60 H